CO 50.21

Dimensions

Weight:

0.37 kg

---

Electrical values:

Nominal voltage (Un):	12 … 36 kV
Covered conductor:	Al 50-240 mm²

---

Specification

Use:	CO 50.21 connector is brushed and prepared with joint compound and so, only the conductors need brushing and greasing. For non tension aluminium to aluminium connections.
Construction:	The lower section of the body protects the screws against corrosion and enables the connector to be easily reopened even after years of service. The parallel conductor grooves are brushed, greased and toothed to ensure reliable connections.
Construction:	Component Material Body Corrosion resistant aluminium alloy Screws Hot-dip galvanised steel Washers Hot-dip galvanized steel Compression plate Aluminium alloy

---

Installation:	It is not necessary to dismantle the connector during the installation work. Brush and grease the peeled conductors and unscrew the bolts and place the conductors into the grooves. Tighten the bolts with articulated spanner and fork wrench to a torque of 40 Nm.
Markings:	CO 50.21

---