CO 50.21

Connectors

Code	CO 50.21
Name	Connectors For bare Conductors
Description	CO 50.21 connector is brushed and prepared with joint compound and so, only the conductors need brushing and greasing. For non tension aluminium to aluminium connections. Equipped with two M10 bolts.

Dimensions

Weight:

0.37 kg

Electrical values

Nominal voltage (Un):	12 … 36 kV
Covered conductor:	Al 50-240 mm²

Specification

Use:

CO 50.21 connector is brushed and prepared with joint compound and so, only the conductors need brushing and greasing. For non tension aluminium to aluminium connections.

Construction:

The lower section of the body protects the screws against corrosion and enables the connector to be easily reopened even after years of service. The parallel conductor grooves are brushed, greased and toothed to ensure reliable connections.

Component	Material
Body	Corrosion resistant aluminium alloy
Screws	Hot-dip galvanised steel
Washers	Hot-dip galvanized steel
Compression plate	Aluminium alloy

Installation:	It is not necessary to dismantle the connector during the installation work. Brush and grease the peeled conductors and unscrew the bolts and place the conductors into the grooves. Tighten the bolts with articulated spanner and fork wrench to a torque of 40 Nm.
Markings:	CO 50.21

Name
Standards
Installation instructions
Catalog Pages
Certificates

Connector CO 50.11

Contact us

Please fill this mandatory field

Please select inquiry subject:

General information

Customer service

Sales contacts

Technical inquiry

Please select an offering:

Your message